S3106-4GE2GF-I-DC_Wuhan Rayton Network Technology Co.,Ltd

PON Aggregation Equipment PTN IP RAN OTN Optical Fiber Transceiver Products 5G Products Optical Module

Optical Fiber Transceiver ProductsHome>>Products>>Optical Fiber Transceiver Products

S3106-4GE2GF-I-DC 4*10/100/1000Base-T (RJ45) + 2*1000Base-X (SFP), managed industrial Ethernet Switch, Din-Rail, 12-36VDC power input

The S3106-4GE2GF-I-DC is a managed L2 industrial Ethernet switch providing 4 electrical and 2 optical gigabit Ethernet ports. It supports abundant L2 features such as VLAN, STP/RSTP/MSTP, ERPS, QoS, ACL, and supports Web/CLI management and third-party SNMP management. All models are with IP40 protection class and meet EMC industrial level 4 requirements. The product supports wide power input voltage range of 12-36VDC and wide operating temperature range of -40 to the +85°C. In addition to its compact size for space-saving installation, each product has passed a 100% burn-in test in 85°C to ensure its quality high-reliability transmission.

All of these features make the product ideal for applications that require high-reliability transmission , such as video surveillance, tolling systems, ITS, and factory automation.

-40 to 85°C operating temperature range
IP40 metal housing with fanless design
Level 4 EMC Protection
One key ring configuration
ERPS with protection switching time ＜20ms
WEB, Telnet, CONSOLE, EMS management

Standard

IEEE 802.3 10Base-T

IEEE 802.3u 100Base-Tx

IEEE 802.3ab 1000Base-T

IEEE 802.3z 1000Base-X

Switch Properties

MAC Table: 8K

Packet Buffer: 4M

VLAN: 4K

VLAN Mode: Acess/Trunk/Hybrid

•802.1Q/port/protocol/MAC/IP subnet based VLAN;

•QinQ and VLAN translation;

•IGMP snooping v1/v2/v3, IGMP proxy, MVR;

•DHCP client/sever/relay

•LACP for port bandwdith extension, load balance;

•STP/RSTP/MSTP for ring protection;

•ERPS with protection switching time <20ms;

•one key ring configuration for STP/RSTP/ERPS;

•Loopback detection and loopback test;

•8-queue QoS with SP/WRR scheduling policy;

•Rate limitation and traffic shapping;

•DLF/multicast/broadcast limitation;

•MAC/VLAN/IP/TCP/UDP port/ToS based ACL

•Dynamic MAC learning and static MAC configuration;

•MAC addresss learning enable/disable per port;

•MAC limitation per port;

•Fiber RDI Remote Defect Indication) alarm;

•Dying Gasp remote equipment fail alarm;

•801.2x, RADIUS, TACACS+

•HTTPS, SSH;

•Port mirror;

•RMON group 1, 2, 3, 9;

•SNMP v1/v2c/v3;

•Online upgrade and dual-Image firmware;

•Configuration backup and restore;

•CONSOLE and telnet for CLI management;

•WEB management;

Interface

Console Ports: 1 RS-232 (RJ45)

Optical Ports: 2 1000Base-X (SFP)

Electrical Ports: 4 10/100/1000/Base-T (RJ45)

LED indicator

Power LED: PWR

Interface LED: RJ45(Link&ACT) , Fiber(Link&ACT)

Power

Power Terminal: 4-pin 5.08mm-spacing plug-in terminal block

Full load power consumption: < 8W

Overload Protection: Support

Reverse Connection Protection: Support

Redundancy Protection: Support

Industrial Standard

EMI:

FCC CFR47 Part 15, EN55022/CISPR22, Class A

EMS:

IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)

IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)

IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV

IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV

IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)

IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)

Machinery:

IEC60068-2-6 (Vibration)

IEC60068-2-27 (Shock)

IEC60068-2-32 (Free Fall)