The RYTQB10 series single-mode transceiver is SFP28 module for duplex optical data communications support 27.95Gb/s and 28.05Gb/s. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock and data recovery (CDR). This module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm.
The transmitter section uses a 1310nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
Features
l Operating data rate support 27.95Gbps and 28.05Gbps
l
l Distance up to 10km
l Single 3.3V Power supply
l Duplex LC Connector Interface, Hot Pluggable
l Built-in dual CDR
l Compliant with MSA SFP+ Specification SFF-8402
l Power Dissipation < 1.2W
l Operating case temperature:
Commercial : 0 to +70°C
Extended: -10~+70℃
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
9um Core Diameter SMF |
|
|
|
10 |
km |
Transmitter |
|
|
|
|
|
Centre Wavelength |
λC |
1295 |
1310 |
1325 |
nm |
Spectral Width (-20dB) |
Δλ |
|
|
1 |
nm |
Average Output Power@28.05Gb/s |
Pout |
-5 |
|
2 |
dBm |
Extinction Ratio |
ER |
4 |
|
|
dB |
Transmitter Dispersion Penalty |
TDP |
|
|
3.2 |
dB |
Receiver |
|
|
|
|
|
Centre Wavelength |
λC |
1260 |
1310 |
1355 |
nm |
Unstressed Receiver Sensitivity(OMA)*Note5 |
Pmin |
|
|
-11.4 |
dBm |
Receiver Overload |
Pmax |
3 |
|
|
dBm |
Optical Return Loss |
ORL |
|
|
-26 |
dB |
LOS De-Assert |
LOSD |
|
|
-17 |
dBm |
LOS Assert |
LOSA |
-30 |
|
|
dBm |
LOS Hysteresis |
|
0.5 |
|
|
dB |